Product Description of RGB Remote Controller
This system is a high-performance RGB LED touching remote controller, adopting the most advanced PWM control technology, controlling all RGB LED products with four lines and three circuits( common anode),owning 640 thousand colors and 20 automatically changing modes.
It is also with the memory function (means the previous settings will be resumed when power on again). Widely used in RGB LED strip lights, LED modules and other LED products.
Owing to the 2.4G high RF wireless remote control technology, it has the characteristics of low power consumption, long distance remote and strong anti-interference ability, high speed telecommunications, etc.
The remote looks fashionable, with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use.
The modular design and easy screwed terminals enable the controller easy to match with all kinds of LED lights.
Technical Parameters(Remote Control)
|
|
Item
|
Parameters
|
|
Remote
|
Working Voltage
|
AAA*3pcs(4.5V)
|
|
Radio Frequency
|
2400-2483.5MHz
|
|
Modulate Method
|
GFSK
|
|
Transmit Power
|
6db
|
|
Standby Power Consumption
|
5uA
|
|
Remote Distance
|
20-30m
|
|
Dimension
|
113×55×18mm
|
|
Controller
|
Working Voltage
|
DC12-24V
|
|
Max Load Control Current
|
6A/circuit
|
|
Standby Power Consumption
|
0.5W
|
|
Output Connection
|
Common anode
|
|
Dimension
|
85mm×45mm×22mm
|
Program List of rgb led strip remote control
|
1
|
Auto Color Changing
|
8 grades of brightness to adjust by pressing Key 3 or Key 5
|
|
2
|
Three Colors Jump to Change
|
8 grades of brightness to adjust by pressing Key 3 or Key 5
|
9
|
Green Color Jumps to Change
|
8 grades of brightness to adjust by pressing Key 3 or Key 5
|
|
3
|
Seven Colors Jump to Change
|
10
|
Yellow Color Jumps to Change
|
|
4
|
Three Colors Jump to Gradual Change
|
11
|
Cyan Color Jumps to Change
|
|
5
|
Seven Colors Jump to Gradual Change
|
12
|
White Color Jumps to Change
|
|
6
|
Red Color Jumps to Change
|
8 grades of brightness to adjust by pressing Key 3 or Key 5
|
13
|
Red/Blue Color Twinkles Alternately
|
8 grades of brightness to adjust by pressing Key 3 or Key 5
|
|
7
|
Blue Color Jumps to Change
|
14
|
Blue/Green Color Twinkles Alternately
|
|
8
|
Purple Color Jumps to Change
|
15
|
Red/Green Color Twinkles Alternately
|
Programming(Code Clearing and Code Matching ) for rgb led controller with remote
Code Matching
For a new kit (remote & controller), the remote can work only when it is programmed to the controller.
Please follow the below instructions:
Confirm correctly connect the power supply, LED controller and LED load.
Press key 3 once within 3 seconds when power on again, the light will blink 2 times when it is done.
Code Clearing
The code can be cleared as needed.
The kit (remote and controller) will stay in the original state after code clearing, and it can work when code matching is done.
Please follow the below instructions:
Confirm correctly connect the power supply, LED controller and LED load.
Press key 3 five times within 3 seconds when power on again, the light will blink 9 times when it is done.
Attention:
1.The regular product for sale is a kit (remote and controller).
The user can re-programme freely as needed. One remote can control countless controllers, but one controller can only be controlled by four remotes (Max).
2.Please check the battery installation and controller(totally discharge the power), when you programme after switching off and switching on.
|
|
2.4G RGB LED Touching Remote Controller Images
|
